Manual

Table of contents

Description
Specifications

2028 Vocal Handheld Microphone

The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Just plug it in and hear the vocals shine like never before. This handheld mic has a wired XLR termination.

Specifications

Polar pattern

Relative humidity (RH) Up to 90 %

Sensitivity, nominal, ±3 dB at 1 kHz 5 mV/Pa; -46 dB re. 1 V/Pa

Output balance principle Impedance balancing with Active Drive

Max. SPL, THD 10% 160 dB SPL peak

Minimum load impedance 1

Temperature range -40°C to 45°C (-40°F to 113°F)

Frequency response 20 Hz - 20 kHz

Frequency response graph System.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]

Maximum output voltage, RMS 9 Vrms; 19 dBV; 28 dBu

Dynamic range Typ. 117 dB

Power supply (for full performance) P48 (Phantom Power)

Current consumption Max 2.5 mA

Rated output impedance 150 Ω

Effective frequency range ±2 dB, at 12 cm (4.7 in) 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz

Capsule diameter 19 mm (0.75 in)

Directional pattern Supercardioid

Cartridge type Pre-polarized condenser

Distortion, THD < 1% 136 dB SPL RMS, 139 dB SPL peak

Common mode rejection ratio (CMRR) > 50 dB at 1 kHz

Cable drive capability 100 m (328 ft)

Principle of operation Pressure gradient

Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Equivalent noise level, A-weighted Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))

Polarity +V at pin 2 for positive sound pressure

Weight 286 g (10.1 oz)

Microphone diameter 48 mm (1.9 in)

Microphone length 188 mm (7.4 in)

Description
Specifications