Manual

Table of contents

Description
Accessories
Specifications

4018 Supercardioid Microphone

Designed for a broad range of long-distance broadcast, ENG and film miking applications, such as booming, dialogue, interview and table or podium use, the 4018 Supercardioid Microphone offers superb flexibility through modular accessories.

Accessories

MMP-GR/GS Preamp with Modular Active MicroDot Cable for Pencil Microphone, 1.8 m (5.9 ft)
GSM4000 Gooseneck Shock Mount for Pencil Microphone
SB0400/SBS0400 Lightweight Stereo Boom for Pencil Microphone
SM4000-C Suspension Mount for Pencil Mics with MMP-C Preamp
UA0639 Clip for Pencil Microphone
UA0836/837 Premium Stereo Boom for Pencil Microphone
UA0897 Shock Mount for Pencil Microphone
DUA0020 Foam Windscreen for Pencil Microphone, Ø19 mm, Length 56 mm (2.2 in)
UA0896 Foam Windscreen for Pencil Microphone, Ø19, Length 92 mm (3.6 in)

Specifications

Polar pattern

Relative humidity (RH) Up to 90%

Output balance principle Impedance balancing

Sensitivity, nominal, ±2 dB at 1 kHz 12 mV/Pa; -38.4 dB re. 1 V/Pa

Matching tolerance (frequency response and sensitivity) ±1 dB

Phase deviation for kit < 10°

Max. SPL, THD 10% 142 dB SPL peak

Minimum load impedance 2

Temperature range -40°C to 45°C (-40°F to 113°F)

Frequency response 20 Hz - 20 kHz

Frequency response graph System.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]

Maximum output voltage, RMS 2.2 V

Dynamic range Typ. 121 dB

Power supply (for full performance) P48 (Phantom Power)

Current consumption 3.5 mA

Rated output impedance 100 Ω

Equivalent noise level, ITU-R BS.468-4 Typ. 23 dB

Effective frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz - 18 kHz

Capsule diameter 19 mm (0.75 in)

Directional pattern Supercardioid

Cartridge type Pre-polarized condenser

Distortion, THD < 1% 134 dB SPL RMS, 137 dB SPL peak

Common mode rejection ratio (CMRR) > 40 dB

Cable drive capability 100 m (328 ft)

Principle of operation Pressure gradient

Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Equivalent noise level, A-weighted Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))

Polarity +V at pin 2 for positive sound pressure

Weight 109 g (3.8 oz)

Microphone diameter 19 mm (0.75 in)

Microphone length 35 mm (1.38 in)

Description
Accessories
Specifications