Manual

Table of contents

Description
Accessories
Specifications

d:facto™ 4018V Softboost Vocal Microphone

The d:facto™ series brings true studio sound to the live stage and broadcasting studio. This version has a pre-programmed high-end boost has a 3 dB soft boost at 12 kHz. The modular nature of the d:facto™ series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.

Accessories

FAADPA2B Handle for d:facto™ Vocal Microphone (XLR)
FAASE2-ewB SE2-ew d:facto™ Adapter for Sennheiser systems
FAASE5B SE5 d:facto™ Adapter for Sennheiser systems
SL1 d:facto™ adapter for Shure, Sony, Lectrosonics systems
WI2 d:facto™ Adapter for Wisycom systems
MMC4018VL d:facto™ 4018VL Linear Vocal Microphone Capsule
MMC4018V d:facto™ 4018V Softboost Vocal Microphone Capsule
DUA0710 Microphone Grid for Vocal Microphone
DUA0703 Foam Windscreen for Vocal Microphone

Specifications

Polar pattern

Relative humidity (RH) Up to 90%

Output balance principle Impedance balancing with Active Drive

Sensitivity, nominal, ±2 dB at 1 kHz 5 mV/Pa; -46 dB re. 1 V/Pa
2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless

Max. SPL, THD 10% 160 dB SPL peak

Minimum load impedance 1

Temperature range -40°C to 45°C (-40°F to 113°F)

Frequency response 20 Hz - 20 kHz

Frequency response graph System.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]

Maximum output voltage, RMS 8 V

Dynamic range Typ. 120 dB

Power supply (for full performance) P48 (Phantom Power)

Current consumption Max 2.0 mA

Rated output impedance 100 Ω

Effective frequency range ±2 dB, at 12 cm (4.7 in) 40 Hz - 16 kHz with 3 dB soft boost at 12 kHz

Capsule diameter 19 mm (0.75 in)

Directional pattern Supercardioid

Cartridge type Pre-polarized condenser

Distortion, THD < 1% 136 dB SPL RMS, 139 dB SPL peak

Common mode rejection ratio (CMRR) > 50 dB at 1 kHz

Cable drive capability 100 m (328 ft)

Principle of operation Pressure gradient

Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Equivalent noise level, A-weighted Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))

Polarity +V at pin 2 for positive sound pressure

Weight 309 g (10.9 oz)

Microphone diameter 52 mm (2.05 in)

Microphone length 205 mm (8.1 in)

Description
Accessories
Specifications