Manual

Table of contents

Description
Accessories
Whats in the box
Specifications

4099 Instrument Microphone

The 4099 CORE Mic, Loud SPL is used to close-mike most types of instruments - from banjos to cellos and most everything in between.

Accessories

GE4099 Gooseneck Extension for Instrument Microphone, 80 mm (3.15 in)
AC4099 Instrument Microphone Clip for Accordion
BC4099 Instrument Microphone Clip for Bass
CC4099 Instrument Microphone Clip for Cello
CM4099 Instrument Microphone Clamp Mount
CS4099 Cold Shoe Mount with Standard (1/4 in) Thread
DC4099 Instrument Microphone Clip for Drum
GC4099 Instrument Microphone Clip for Guitar
MS4099 Mic Stand Mount
PC4099 Instrument Microphone Clip for Piano
STC4099 Instrument Microphone Clip for Sax and Trumpet
UC4099 Universal Instrument Microphone Clip
VC4099 Instrument Microphone Clip for Violin and Mandolin

Whats in the box

4099 CORE Mic, Loud SPL

Clip for Violin, Mandolin

Specifications

Polar pattern

Relative humidity (RH) Up to 90%

Sensitivity, nominal, ±3 dB at 1 kHz 2 mV/Pa; -54 dB re. 1 V/Pa

Output balance principle Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter

Max. SPL, THD 10% 152 dB SPL peak

Temperature range -40°C to 45°C (-40°F to 113°F)

Gooseneck length 140 mm (5.5 in)

Frequency response 20 Hz - 20 kHz

Frequency response graph System.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]

Cable length 1.8 m (5.9 ft)

Dynamic range Typ. 109 dB

Power supply (for full performance) For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V

Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter

Rated output impedance From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω

Directional pattern Supercardioid

Cable diameter 1.6 mm (0.06 in) / 2.2 mm (0.09 in)

Cartridge type Pre-polarized condenser

Distortion, THD < 1% 134 dB SPL RMS, 137 dB SPL peak

Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter

Cable drive capability Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter

Effective frequency range ±2 dB, at 20 cm (7.9 in) 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz

Principle of operation Pressure gradient

Connector MicroDot

Equivalent noise level, A-weighted Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))

Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)

Weight Microphone: 17 g (0.60 oz)
Instrument Microphone Clamp Mount (CM4099): 16 g (0.56 oz)
Instrument Microphone Clip for Accordion (AC4099): 5 g (0.18 oz)
Instrument Microphone Clip for Bass (BC4099): 20 g (0.71 oz)
Instrument Microphone Clip for Cello (CC4099): 13 g (0.46 oz)
Instrument Microphone Clip for Drum (DC4099): 13 g (0.46 oz)
Instrument Microphone Clip for Guitar (GC4099): 12 g (0.42 oz)
Instrument Microphone Clip for Piano (PC4099): 19 g (0.67 oz)
Instrument Microphone Clip for Sax and Trumpet (STC4099): 7 g (0.25 oz)
Instrument Microphone Clip for Violin and Mandolin (VC4099): 10 g (0.35 oz)
Universal Instrument Microphone Clip (UC4099): 15 g (0.53 oz)
Mic Stand Mount for Instrument Microphone (MS4099): 28 g (0.99 oz)
Cold Shoe Mount with standard 1/4" in thread (CS4099): 5 g (0.18 oz)

Microphone diameter 5.7 mm (0.22 in)

Microphone length 45 mm (1.8 in)

Description
Accessories
Whats in the box
Specifications