Manual

Table of contents

Description
Accessories
Specifications

4080 Cardioid Lavalier Mic

While our miniature omnidirectional mics are ideal for situations where a broad pickup pattern is essential and off-axis noise is not a problem, in some challenging acoustic environments a directional microphone is the better choice.

Accessories

CM1618B00 MicroDot Extension Cable, 1.6 mm, 1.8 m
DMM0014 Clip for 4080 Cardioid Lavalier Microphone
DMM0015 Double Clip for 4080 Cardioid Lavalier Microphones
DMM0016 Magnet Mount for 4080 Cardioid Lavalier Microphone
DUA0577 Foam Windscreen for 4080 Lavalier Microphone

Specifications

Polar pattern

Relative humidity (RH) Up to 90%

Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa

Effective frequency range ±2 dB 250 Hz - 17 kHz with typ. 4 dB soft boost at 4 - 6 kHz (-5 dB at 100 Hz)

Max. SPL, THD 10% 134 dB SPL peak

Temperature range -40°C to 45°C (-40°F to 113°F)

Frequency response 20 Hz - 20 kHz

Frequency response graph System.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]

Cable length 1.2 m (3.9 ft)

Dynamic range Typ. 106 dB

Power supply (for full performance) For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V

Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter

Rated output impedance 30 - 40 Ω

Directional pattern Cardioid

Cable diameter 1.6 mm (0.06 in)

Cartridge type Pre-polarized condenser

Distortion, THD < 1% 126 dB SPL RMS, 129 dB SPL peak

Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter

Principle of operation Pressure gradient

Connector MicroDot

Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))

Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin

Weight 15 g (0.5 oz) incl. Cable and MicroDot connector

Microphone diameter 5.7 mm (0.22 in)

Microphone length 30 mm (1.2 in)

Description
Accessories
Specifications