This amazing cardioid mic is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.
Accessories
MMP-GR/GS Preamp with Modular Active MicroDot Cable for Pencil Microphone, 1.8 m (5.9 ft)
GSM4000 Gooseneck Shock Mount for Pencil Microphone
MC4001 Microphone Clip for MMP-E Preamp with Active Cable
SB0400/SBS0400 Lightweight Stereo Boom for Pencil Microphone
SM4000-C Suspension Mount for Pencil Mics with MMP-C Preamp
UA0639 Clip for Pencil Microphone
UA0836/837 Premium Stereo Boom for Pencil Microphone
UA0897 Shock Mount for Pencil Microphone
DUA0020 Foam Windscreen for Pencil Microphone, Ø19 mm, Length 56 mm (2.2 in)
UA0896 Foam Windscreen for Pencil Microphone, Ø19, Length 92 mm (3.6 in)
Whats in the box
Cardioid Mic Capsule
Modular Active Cable, XLR, Rear, 3 m (9.8 ft)
Specifications
Polar pattern
Relative humidity (RH)Up to 90%
Output balance principleImpedance balancing with Active Drive
Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
Matching tolerance (frequency response and sensitivity)±1 dB
Phase deviation for kit< 10°
Max. SPL, THD 10%159 dB SPL peak
Minimum load impedance2
Temperature range-40°C to 45°C (-40°F to 113°F)
Frequency response20 Hz - 20 kHz
Frequency response graphSystem.Collections.Generic.List`1[DpaMicrophones.Core.Models.Dtos.ProductDtos.AssetDto]
Switchable attenuator, filters etc.0 dB / -20 dB
Maximum output voltage, RMS> 5 V
Dynamic rangeTyp. 121 dB
Power supply (for full performance)P48 (Phantom Power)
Current consumption2.8 mA
Rated output impedance200 Ω
Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
Effective frequency range, ±2 dB, at 30 cm (11.8 in)40 Hz - 20 kHz
Capsule diameter19 mm (0.75 in)
Directional patternCardioid
Cartridge typePre-polarized condenser
Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak